trouble with openvpn on raspberry pi

[Torad 0]

I have tried following the guide below to  setup torguard with openvpn on my raspberrypi 3. However, when I go to test it my ip address remains unchanged. Also i do not have tun0 entry when i run ifconfig command. 

 

https://torguard.net/knowledgebase.php?action=displayarticle&id=174

 

Anyone know a solution to this? thanks

 

edit:

nevermind, figured out my problem

[Dahjer 0]

Having the some issues getting connected with a pi... Tried everything in this thread.

When running... sudo openvpn TorGuard.USA-DALLAS.conf

I get the following 

Quote

Wed Mar 14 03:43:43 2018 OpenVPN 2.4.0 arm-unknown-linux-gnueabihf [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Oct 14 2018
Wed Mar 14 03:43:43 2018 library versions: OpenSSL 1.0.2l  25 May 2017, LZO 2.08
Wed Mar 14 03:43:43 2018 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Wed Mar 14 03:43:43 2018 NOTE: --fast-io is disabled since we are not using UDP
Wed Mar 14 03:43:43 2018 Outgoing Control Channel Authentication: Using 256 bit message hash 'SHA256' for HMAC authentication
Wed Mar 14 03:43:43 2018 Incoming Control Channel Authentication: Using 256 bit message hash 'SHA256' for HMAC authentication
Wed Mar 14 03:43:43 2018 TCP/UDP: Preserving recently used remote address: [AF_INET]96.44.189.250:1912
Wed Mar 14 03:43:43 2018 Socket Buffers: R=[87380->327680] S=[16384->327680]
Wed Mar 14 03:43:43 2018 Attempting to establish TCP connection with [AF_INET]96.44.189.250:1912 [nonblock]
 

 

It never completes or moves forward from here.

[Malookie 0]

On 5/7/2019 at 12:25 PM, Torad said:

I have tried following the guide below to  setup torguard with openvpn on my raspberrypi 3. However, when I go to test it my ip address remains unchanged. Also i do not have tun0 entry when i run ifconfig command. 

 

https://torguard.net/knowledgebase.php?action=displayarticle&id=174

 

Anyone know a solution to this? thanks

 

edit:

nevermind, figured out my problem

How did you figure it out? What did you do to fix it? I have the same problem.

[Honeybadger85 0]

Unfortunately I never got it working in the end. I did manage to get the VPN to connect but I’d made such a mess of Linux with all the things I’d tried that I gave up. 
 

when it did work the VPN speed was way too slow. OpenVPN was too heavy for my pi. 
I ended up buying an Asus router and used the VPN client in the software... to be honest it was sooooo much easier. 

[19807409 22]

better use wireguard instead, setup is quite easy and should be similar if not equal to this:

 

rpi3 is restricted with 100Mb LAN, but rpi4/rock4... have 1Gb LAN and work nicely, I have 6 rocks connected over torguards wireguard since wireguard was in beta stage and I did not reboot since then, still connected.